Nov. 26^th, 2012 Establishing Shenzhen Changdong Stamping Dies CO.,LTD, with only 6 employees within the factory(6,000 square foot), mainly producing small-size stamping dies of car cable connectors, small stamping tooling of auto bracket parts for UK customer, and auto lamp stamping parts for Federal-Mogul in Brazil.

March 2013 Doubling stamping dies plant size into 13,000 square foot, and planning to expand the production scale.

April 2013 Ordering 400T Biaxial Punch Press for tryouts of big stamping dies, with the bed size about 2800*1200mm.

July 2013 Winning stamping dies orders more than USD150,000, and ordering back automatic CMM measurement device for checking stamping parts' quality.

August 2013 Gaining stamping dies and stamping parts orders more than USD300,000, and finishing the installment of 400T punch press, capable of making much bigger-size stamping parts and stamping dies.

October 2013 Establishing its own cafeteria to provide nutritive meals for all of employees, and setting up 8 Tons Travelling Crane for lifting metal stamping dies.

November 2013 Booking the whole container to export stamping dies, and taking less than one year from exporting LCL stamping dies to FCL stamping dies.

January 2014 Sharing its achievement and rewarding the annual bonus, by booking flight tickets and providing subsidies for all of employees.

May 2014 Winning its stamping dies purchasing orders from new Hungarian customer(AI) and new Lithuanian customer(UAB), for Isuzu and Audi stamping cars projects, and expanding the sales department into 6 people, moving into a new office for work.

June 2014 For the convenience of employees, starting a new attendance of human-based management, more flexible to control the working time, and also updating Chandong website into www.cdstamping.com. and www.stamping-die.com.

August 2014 Winning a huge stamping dies projects order from EUROSTAMP(second largest automotive parts maker in Europe).

September 2014 Organizing the outdoor training for all employees, and learning how to Trust, Cooperate and Appreciate with each other through the training course.

October 2014 Starting the new business with one famous automotive parts company in Italy, Magneti Marelli.

February 2015 Purchasing the 800T press to meet customer’s(Magneti Marelli) request, with the bed size: 4M*1.8M, and providing the reliable assurance for much bigger-size stamping parts and stamping dies manufacturing.

December 2015 Moving to Dalang, Dongguan, with a much bigger company size about 43,000 square foot, further improving the capacity of making metal stamping parts and stamping dies, and also everyone (including the trainee) enjoying one single room, equipped with air-conditioner, heater and washing machine.

March 2016 Receiving the order of Daimler Benz VS30 project, totally 11 parts, and realizing riveting nuts inside die technology.

April 2016 800T press coming back and starting the installation.

May 2016 Finishing 800T press installation and starting the production, after then owning the press from 45-800T, available to make small stamping tools to big size stamping dies.

July 2016 Awarding the ISO9001:2008 Quality System Management Authentication and UKAS & IAF Certificates.

November 2016 Starting tools buyoff for Daimler Benz VS30 project, 11pcs automotive parts, to prepare for stamping parts’ mass production.

December 2016 Awarding with Nissan H60 project, order total value about 1,950,000USD(13,000,000RMB), including 19pcs automotive parts, such as A, B pillars and car bumper parts, and making as casting-structure transfer dies.

July 2018 Attending the Thailand exhibition, and successfully starting the business with the local CN Automotive parts company during the exhibition, and after then exporting metal stamping parts and stamping dies to totally 16 countries.

June 2019 Starting to develop the prototype die for vehicle prototypes of Suzuki car project, finishing the deep drawn prototype stamping parts in 3 weeks, and achieving 85%-90% qualified of dimensions for prototype parts.

March 2020 After COVID-19, donating Masks more than 30,000pcs to our customers, and paying all of unmatured debts to our suppliers.

June 2020 Ordering 2 bigger double travelling cranes, available to load 15T and 10T, and to help the assembly of big stamping dies and prototype dies.

July 2020 Ordering the 3D Blue Laser Ray Scanner, able to check geometric shapes of stamping parts and metal prototype parts more convenient.

September 2021 Receiving one project of 11 prototype parts of Nissan prototype vehicles, and finishing metal prototype dies and prototypes stamping in 3 weeks.

October 2021 Winning one new order of prototype parts for Ineos prototype vehicle, after that developing prototype dies for 3 projects of prototype vehicles.

November 2021 Updating the website and increasing the new business of prototype vehicles, for Prototype Dies, Prototype Parts, Engineering Prototypes, Prototype Stamping.